Tripp Lite 93-2879 Server User Manual


 
31
To configure the DHCP server for the Management LAN:
Enter the Gateway address that is to be issued to the DHCP clients. If this field is left blank, the
IP address of the B096-048/016 will be used
Enter the Primary DNS and Secondary DNS address to issue the DHCP clients. Again if this field
is left blank, the IP address of the B096-048/016 is used, so leave this field blank for automatic
DNS server assignment
Optionally enter a Domain Name suffix to issue DHCP clients
Enter the Default Lease time and Maximum Lease time in seconds. The lease time is the time
that a dynamically assigned IP address is valid before the client must request it again
Click Apply
The DHCP server will sequentially issue IP addresses from a specified address pool(s):
Click Add in the Dynamic Address Allocation Pools field
Enter the DHCP Pool Start Address and End Address and click Apply
The DHCP server also supports pre-assigning IP addresses to be allocated only to specific MAC addresses
and reserving IP addresses to be used by connected hosts with fixed IP addresses. To reserve an IP
addresses for a particular host:
Click Add in the Reserved Addresses field
Enter the Hostname, the Hardware Address (MAC) and the Statically Reserved IP address for
the DHCP client and click Apply