Filter
Top Products
_____________________________________________________________________
B096-016 B096-048 and B092-016 User Manual Page 133
Select Enable Nagios, specify the name of the device on the upstream server and determine the
check to be run on this port. Serial Status monitors the handshaking lines on the serial port and
Check Port monitors the data logged for the serial port
10.3.5 Configure selected Network Hosts for Nagios monitoring
The individual Network Hosts connected to the Console Server that is to be monitored must also be
configured for Nagios checks:
Select Serial & Network: Network Port and click Edit on the Network Host to be monitored
Select Enable Nagios, specify the name of the device as it will appear on the upstream Nagios
server
Click New Check to add a specific check which will be run on this host
Select Check Permitted TCP/UDP to monitor a service that you have previously added as a
Permitted Service
Select Check TCP/UDP to specify a service port that you wish to monitor, but do not wish to
allow external (SDT Connector) access
Select Check TCP to monitor