Filter
Top Products
82
In Computer, enter the appropriate IP Address and Port Number:
Where there is a direct local or enterprise VPN connection, enter the IP Address of the
Console Server, and the Port Number of the SDT Secure Tunnel for the Console Server’s
serial port (the one that is attached to the Windows computer to be controlled). For
example, if the Windows computer is connected to serial Port 3 on a Console Server
located at 192.168.0.50 then you would enter 192.168.0.50:7303.
Where there is an SSH tunnel (over a dial-up PPP connection or over a public internet
connection or private network connection), simply enter the localhost as the IP address, i.e.
127.0.0.1. For Port Number, enter the source port you created when setting SSH
tunneling/port forwarding (in Section 6.1.6) e.g. :1234.
Click Option. In the Display section, specify an appropriate color depth (e.g. for a modem
connection it is recommended you not use over 256 colors). In Local Resources, specify the
peripherals on the remote Windows computer that are to be controlled (printer, serial port,
etc.)
Click Connect