Filter
Top Products
Network Scanning Setup
Xerox WorkCentre 7232/7242 System Administration Guide 145
6. Log on to the FTP or SMB server. Navigate to the repository (destination) that was
specified earlier. Your scanned document is located in that folder.
NOTE: If Kerberos (remote authentication) has been enabled, a separate login screen
appears when the Network Scanning feature is selected. Documents are not scanned
in unless the server authenticates user access.
Remote Authentication Setup (If Required)
The machine uses Kerberos for Windows and Kerberos for Solaris for user
authentication. When enabled, user access to scanning features (excluding Scan to
Mailbox) will be constrained. A popup message will prompt the user to enter a login and
password before using the scanning features. The login and password will be passed
to the Kerberos server. Only when the user is authenticated the feature will be made
available.
Information Checklist
When using Scan to E-mail, Kerberos authentication has the following effect on the
feature:
1. Select [Scan to Mailbox].
2. A login/password popup is displayed requiring the user to provide a username
and password to the Kerberos server. Enter the login and password.
The device passes the login and password to the Kerberos server and if a match is
found, the user is successfully authenticated.
The "From:" field of the e-mail is automatically populated with the device login name
and e-mail address created at the time of the device configuration.
If SMTP server requires authentication, the device will use the SMTP username/
password created at the configuration of the device before sending an e-mail to the
server.
When using Scan to PC, Kerberos authentication has the following effect on the
feature:
1.
Select [Scan to PC].
Item By
An existing operational network utilizing TCP/IP is required. These
procedures are not designed to install a network
Customer
Obtain and record the following information:
• Remote Server IP address
• Remote Server Name
• DNS Address if Host Name is used instead of the IP address name
• Remote Server Realm Name
Customer