Filter
Top Products
Using CentreWare Internet Services to Configure Settings on the Machine
Xerox WorkCentre 7232/7242 System Administration Guide 53
Using CentreWare Internet Services to Configure Settings on
the Machine
This section provides the full listing of the items that can be set for each port through
CentreWare Internet Services.
To access each setting page on CentreWare Internet Services, click the [Properties]
tab, and then select [Connectivity].
NOTE: The following port names are displayed on the screen when the respective
ports are activated. To activate a port through CentreWare Internet Services, select
[Properties] > [Connectivity] > [Port Settings], and then the required port.
Ethernet – page 53
USB – page 54
SSDP – page 62
Microsoft Networking – page 63
LPD – page 64
Port 9100 – page 65
SMTP Server – page 66
LDAP – page 67
POP3 Setup – page 69
HTTP – page 70
Proxy Server – page 71
IPP – page 72
IPP – page 72
WebDAV – page 73
Bonjour – page 74
WSD – page 74
Ethernet
This page allows you to configure the Ethernet settings.
NOTE: Some settings on this page will only be available after you restart CentreWare
Internet Services, or after the machine is switched off and on.
1. At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2. In the [Properties] frame, select the plus symbol [+] to the left of the [Connectivity]
folder.
3. Select the plus symbol [+] to the left of the [Physical Connections] folder.
4. Select [Ethernet].
5. Set up the following displayed in the frame.
• Rated Speed – Select the Ethernet transmission format.