Filter
Top Products
2 Product Overview
30 Xerox WorkCentre 7232/7242 System Administrator Guide
• HP-GL/2 Emulation – Allows you to set parameter values for HP-GL/2 emulation to
print documents. It also allows you to store, retrieve, and delete up to 20 emulation
settings.
– Retrieve Programming – Retrieves emulation settings and makes them active.
– Programming – Allows you to set emulation parameter item values.
– Store/Delete Programming – Allows you to store user-programmed emulation
mode parameters on the machine.
– Default Programming – Sets the default emulation mode settings when the
machine is turned on.
• PDF – Allows you to set parameter values and a password for PDF direct printing.
– Setup – Allows you to set emulation parameter item values for PDF direct
printing.
– Password – Allows you to enter a password to restrict access to PDF direct
printing.
Fax Receiving Mode
This feature allows you to set the fax reception mode: Manual Receive or Auto Receive.
NOTE: This feature is available only when the Server Fax feature is enabled.
1. Select [Fax Receiving Mode] on the [Machine Information] screen.
2. Select the required option.
• Manual Receive – Starts receiving a fax or polling after you have answered the call
and confirmed it is a fax.
• Auto Receive – Receives a fax automatically.
Billing Information
This section describes the features that allow you to view the billing meter information,
and also specify the output sequence for various reports and lists.
1. Press the <Machine Status> button on the control panel.
2. Select the [Billing Information] tab.
3. Select the required option.
Billing Information
This feature allows you to view the total number of prints made on the machine using
the [Current Meter Reading]. You can also view the serial number.
1. Select [Billing Information] on the [Billing Information] screen.
• Machine Serial Number – Displays the serial number of the machine.
• Current Meter Reading – Displays the following current meter readings: