Filter
Top Products
Scan to PC Setup (FTP)
Xerox WorkCentre 7232/7242 System Administration Guide 147
10. Repeat steps 8 and 9 for the Secondary Server settings.
11. Select [Domain Name] and enter the domain name. This is the fully qualified
domain which Kerberos server supports.
Enabling Remote Authentication
1. Connect the machine to the network.
2. In the Key Operator mode, press the <Machine Status> button on the control
panel, and then select the [Tools] tab on the screen.
3. Select [Authentication/Security Settings], then [Authentication].
4. Set the authentication method to enable Kerberos. Select [Login type], then
[Remote Access] followed by [Save].
Scan to PC Setup (FTP)
Files can be scanned on the multifunction machine and routed on to a server or a client
using FTP protocol. Directory structures (repositories) need to be created on the server
to hold the scanned documents.
See the Quick Network Setup Guide for information about how to set up templates,
repositories, transfer prococols, and enabling ports.
Prerequisites for Scan to PC (FTP)
1. Confirm that an existing operational network utilizing TCP/IP is available.
2. FTP Server/Client exists and is running.
3. Repository (folder) needs to be created on the FTP server to hold the scanned
document.
4. Confirm that the following ports are enabled:
1) TCP/IP
2) FTP Client
Data to Set Up Scan to PC
(FTP)
Install
Requirement
Comments
Repositories need to be set up on
the FTP server.
Required This is the location or path of the directory
for saving scanned documents.
Server IP Address Required This is the IP address of the FTP server.
FTP Login/password information Optional This is required if the FTP server requires
login/password authentication. Most FTP
servers require a login/password.
Kerberos IP Address Optional If Remote Authentication is required, then
Kerberos needs to be enabled.