Filter
Top Products
Lower Feeder Unit
(LFU)
magicolor 6100 DeskLaser User's Guide5-4
Unpacking the LFU
1 Remove the feeder from the shipping
carton, and place it on a flat surface.
2 Remove any tape and packing material
from the feeder.
Save the packing material in case you ever
have to move or ship the feeder to a new
location.
Installing the LFU
»Note:
Up to two optional lower feeder units may be installed on your printer. The
following steps apply to both single and dual LFU installations except where noted.
WARNING!
Your printer weighs approximately 101 lbs (46 kg) without consumables.
Be sure to have help when lifting and moving it. If consumables are installed, be sure
to keep the printer level when moving it to prevent accidental spills.
ACHTUNG!
Das Gewicht dieses Druckers beträgt ohne Verbrauchsmaterial ca. 46
kg. Bitte versuchen Sie niemals, den Drucker alleine anzuheben oder zu
transportieren. Achten Sie bitte darauf, daß der Drucker mit eingebauten
Tonerkartuschen nur waagerecht transportiert wird.
1 Turn off the printer, and then disconnect the power cord and all interface
cables from the printer.
2