Filter
Top Products
Repacking the Printer
Repacking the Printer 7-11
Remove the Lower Feeder Unit(s)
»Note:
If you don’t have a lower feeder unit installed, skip to the next section.
1 Close the printer’s top and front covers.
2 Remove the plastic side covers from the sides of the lower feeder unit.
»Note:
If you have two lower feeder units
installed, remove the plastic side covers
from the top lower feeder unit only.
3 Locate the cable at the left rear of the
lower feeder unit that connects it to the
printer, and then unplug it.
4 Loosen the thumbscrew that attaches
the bracket to the lower feeder unit until
the bracket moves freely away from the
lower feeder unit.
103mati.eps
Thumbscrew