Filter
Top Products
Preventing Media Jams
magicolor 6100 DeskLaser User's Guide6-4
If you have problems with double feeding, remove the media from the cassette
and fan the sheets. They may be sticking together.
»Note:
Do not fan transparencies since this causes static.
Remove transparencies from the output tray immediately to avoid static buildup.
Do not allow the output tray to overfill.
»Note:
The face-down output tray has a 250-sheet capacity. Jamming may occur if
you allow media to accumulate more than 250 sheets at a time.
Store media in a dry location away from moisture and humidity.
Make sure you’ve loaded the media printing-side up. Many manufacturers place
an arrow on the end of the wrapper to indicate the printing side. If you can’t deter-
mine which side of the media to print on, remove the media from the cassette, turn
the stack over, and then place it back in the cassette.
Ensure that you have the correct media type selected if you’re printing on enve-
lopes, glossy stock, labels, thick stock, transfer media, or transparencies.
Ensure that the printer is on a hard, flat, level surface.
Ensure that the cassette contains only one type of media at a time.