Filter
Top Products
Removing Media Jams
magicolor 6100 DeskLaser User's Guide6-10
6 If you cannot reach the media
from the top of the fuser or the
media will not come out easily,
open the fuser roller pressure
release levers (one at each end of
the fuser).
7 Remove the jammed media by
pulling it from the bottom of the
fuser (through the printer’s rear
cover), not from the top of the
fuser.
This prevents any unfused toner
from dirtying the fuser rollers.
Caution:
Be careful not to touch the
transfer drum while removing
jammed media.
8 Close the fuser roller pressure
release levers (one at each end of
the fuser).
9 Close the top cover of the printer.
10 Close the rear cover of the printer.