Filter
Top Products
Requirements
magicolor 6100 DeskLaser User’s GuideA-4
einen geerdeten AC Ausgang mit geregeltem Gleichstrom mit 120 V oder 220-240 V.
Der Erdungsansluß des Stromkables sollte gut geerdet werden, um Stromschläge
und Feuer zu vermeiden.
»Note:
In compliance with UL guidelines, “The appliance inlet is considered to be the
main disconnect device.”
Your printer requires a properly grounded AC outlet with a rated line voltage of
100 V, 120 V, or 220-240 V.
The line voltage must remain within ±10 percent of the rated voltage for proper
operation of the printer.
Noise-generating equipment should not be connected to the same electrical outlet
as the printer.
Fused For at least 15 amperes (8 amperes for 240 V).
Printer Draws 11 A at 120 V, or 6 A at 240 V, or 13 A at
100 V.
Rated Line Voltage Voltage of 100V, 120 V, or 220–240 V must remain
within ±10 percent of the rated line voltage for proper
operation.
Amperage Capacity of
the Electrical Outlet
Amperage capacity at least 1.2 times that used by
the printer.
Maximum Electrical
Current
Required during operation is 11 amps for a 120 V
system, 6 amps for a 220–240 V system and 13
amps for a 100 V system.
Noise-generating
Equipment
Should not be connected to the same electrical
outlet as the printer.
Recommended Frequency 50–60 Hz ±2 Hz for a 100 V system, 60 Hz ±2 Hz for
a 120 V system, and 50 Hz ±2 Hz for a 220-240 V
system.