Filter
Top Products
Lower Feeder Unit
(LFU)
Options 5-7
7 Install the metal bracket underneath the
side of the printer just below the con-
nector.
Holding the bracket at a slight angle, slide
it up into the hole underneath the printer
before setting it to vertical.
8 Make sure that the hole in the metal
bracket is lined up with the correspond-
ing hole on the input feeder.
9 Tighten the thumbscrew to attach the
bracket to the lower input feeder.
For dual LFU installations:
repeat steps
7–9 to secure the bracket between the
upper and lower LFU.
098mati.eps
Bracket