Filter
Top Products
Repacking the Printer
Repacking the Printer 7-9
Remove the Duplex Unit
»Note:
If you don’t have a duplex unit installed, skip to the next section.
1 Close the printer’s top and front covers.
2 Remove the left plastic side cover
from the lower feeder unit.
»Note:
If you have two lower feeder
units installed, remove the left plastic
side cover from the top lower feeder
unit only.
3 Locate the cable at the left rear of the
optional feeder that connects the
duplex unit to the printer, and then
unplug it.