Filter
Top Products
Cleaning the Printer
magicolor 6100 DeskLaser User's Guide3-38
Cleaning the Exterior of the Printer
WARNING!
Turn off the printer, unplug the power cord, and disconnect all interface
cables before cleaning. Do not spill water or detergent into the printer; otherwise the
printer will be damaged and an electric shock may occur.
ACHTUNG!
Ziehen Sie den Netzstecker aus der Steckdose bevor Sie den Drucker
reinigen. Versch
ü
tten Sie kein Wasser oder andere Fl
ü
ssigkeiten auf dem Drucker, da
das Ger
ä
t sonst besch
ä
digt wird oder die Gefahr eines elektrischen Schlages besteht.
To protect your printer and maintain its appearance, clean the exterior regularly. Use
the following guidelines:
Use only a dry or slightly damp, lint-free, soft cloth moistened only with water or
mild detergent.
Never use cleaning solutions that contain solvents, such as alcohol and benzene.
Solvents may damage the printer’s finish.
Always test any cleaning solution on a small area of your printer to check the solu-
tion's performance.
Never use sharp or rough implements, such as wire or plastic cleaning pads.
Never spray a cleaning solution directly on the printer as the cleaning solution will
penetrate to the interior of the printer and cause damage.