Filter
Top Products
Lower Feeder Unit
(LFU)
Options 5-9
13 Install the right side cover(s).
14 Install the left side cover(s).
a Attach the rotation slot on the cover to the rotation pin on the LFU.
b Rotate the left side cover to snap it into place on the printer.
15 For best output quality and longest con-
sumables life, install the printer on a hard,
flat, level (within 1.5°) surface capable of
supporting about 143 lbs (65 kg).
A surface can be tested for levelness with a
round pencil. If the pencil rolls, the surface is
not level.
»Note:
If you move the printer with the lower
feeder unit(s) attached, lift the unit by the
four bottom corners of the lowest feeder, not
by the feeder's cassette slot and not by the printer itself.
Rotation slot and pin