Filter
Top Products
Duplex Unit
Options 5-11
3 Remove the upper paper exit cover
from the top-rear of the printer.
4 Facing the back of the printer,
using a small coin or flat-bladed
screwdriver, remove the two plugs
from the upper-rear of the printer
by gently prying outward from the
plug slots.
5 Remove the two access plates
located on the rear, inside panels
of the LFU by sliding the plates
toward you.
6 Open the duplex unit top cover.
7 Attach the duplex unit by aligning
the pins with the slots located at
the lower rear of the LFU.
8 Push the top of the duplex unit
toward the printer to snap it into
place against the rear printer
casing.
Upper paper exit cover
Duplex
u
n
i
t
Plugs
LFU
Access plates
Top cover