Filter
Top Products
Status and Service
Messages
Printer Jams and Troubleshooting 6-15
Status Messages
»Note:
Status messages are not displayed while the printer is off line.
This status message... means... Do this...
ADJUST
INPUTBIN
BIN
The specified cassette is not
inserted correctly.
Adjust the cassette.
BELT CARTRIDGE
MISINSTALLED
The OPC belt cartridge is either
missing or incorrectly installed.
Ensure that an OPC belt
cartridge is correctly
installed.
CANCELLING JOB
The Cancel key has been
pressed, and the print job is
being canceled.
No action needed.
CHECK CLEANING
ROLLER
The cleaning roller needs to be
replaced.
Install a new cleaning
roller.
CHECK WASTE TONER
Either the waste toner pack is
full and needs to be replaced, or
it is incorrectly installed.
Ensure that the waste
toner pack is not full and
is correctly installed.
CLEANING ROLLER
MISINSTALLED
The fuser cleaning roller isn’t
installed correctly.
Remove and reinstall
cleaning roller.
DRUM JAM
Media has jammed in the drum
area.
Locate and remove the
jam.
DUPLEX JAM
Media has jammed in the duplex
unit.
Locate and remove the
jam.
DUPLEX UNIT PANEL OPEN
One of the duplex unit doors is
open.
Ensure all doors are fully
closed.