Filter
Top Products
Configuring the Printer
Driver
magicolor 6100 DeskLaser User's Guide2-4
»Note:
You should configure your printer driver settings via the printer driver properties
method for your typical print jobs and use your application’s printer setup method for
print jobs that require special, less frequently needed printer settings.
The tabs and a summary of the options found on each are as follows:
General
—Allows you attach comments, use a separator page, and print a
test page. See your Windows documentation.
Details
—Allows you to set interface connection details. See your Windows
documentation.
Sharing
—Allows you to set up the printer so others on the network can use it.
See your Windows documentation.
Color Management (Windows 98 only)
—Allows you to select the color pro-
file associated with your printer or allow the operating system to make the
selection for you.
32-bit SuperDriver Setup
—This tab leads to the following set of tabs that are
also available from your application’s printer setup properties. See “32-bit
SuperDriver Setup” on page 2-7.
Paper
—Allows you to provide information about the document type and
location of the media you want to print on. See “Configuring Paper
Options” on page 2-8.
Page Layout
—Allows you to specify N-up (Number-up) settings, scaling
and watermarks used for your print jobs. See “Configuring Page Layout
Options” on page 2-14
Image
—Allows you to provide settings for color format, image brightness
and contrast, color balance, and color matching. See “Configuring Image
Options” on page 2-21.
Device Option
—Allows you to specify which printer options are installed
on your printer. See “Configuring Device Options” on page 2-25.
About
—Displays the magicolor 6100 DeskLaser printer driver release
version and date. See “Information on the About Tab” on page 2-26.