Filter
Top Products
Repacking the Printer
Repacking the Printer 7-5
2 Remove the toner cartridges.
3 Prepare the fuser unit for shipment (includes removing the fuser oil
bottle).
4 Change the waste toner bottle.
5 Remove the duplex unit (if attached).
6 Remove the lower feeder unit(s) (if attached).
7 Pack the printer for shipment.
Remove the Cables and Media Tray(s)
1 Turn off the printer.
2 Remove the power cable and all interface cables.
3 Remove the media tray(s) from the printer.
Remove the Toner Cartridges
1 Open the printer’s front and top covers.
Caution:
If you have a duplex unit installed, open its top cover before opening the
printer’s top cover.
Leave the covers open during the repacking procedure.
2 Remove the four toner cartridges, attach the protective shields over their
magnetic rollers, and store them in their original packaging.
Prepare the Fuser Unit
WARNING!
The fuser unit can become extremely hot and cause severe
burns. Make sure the unit is cool before handling it.
ACHTUNG!
ACTUNG! Die Fixiereneinheit kann sehr heiß werden, so daß
Verbrennungsgefahr besteht. Bitte lassen Sie die Fixiereneinheit einige Zeit abkühlen,
bevor Sie diese berühren.