Filter
Top Products
Configuring the Printer
Driver
Printer Driver Configuration 2-3
Configuring the Printer Driver
This section explains how to access and configure the magicolor 6100 DeskLaser
printer driver for Windows 95/98, and for Windows 2000/NT 4.0 installations.
The printer configuration options are located on tabs that appear in the
magicolor
6100 DeskLaser
printer driver window. To access options for viewing or modification,
open the printer driver window and click on the tab appropriate for your needs. Online
help is also available while you’re configuring the printer driver. Just choose any Help
button.
Windows 95/98 Configuration Methods
»Note:
If you’re using Windows 2000/NT 4.0, refer to “Windows 2000/NT 4.0
Configuration Methods” on page 2-5 for complete information.
There are two methods of accessing the configuration options of the printer driver:
... via the printer device properties ... via your application’s printer setup
Gives you access to all printer settings Gives you access to Paper, Page Layout,
Image, Device Option, and About tabs.
Lets you assign the default printer settings for
all print jobs
Lets you assigns the printer settings only for
the current print job
Retains your settings until changed again via
properties
Temporarily overrides the existing default
settings
How To:
1 From the Windows Start menu choose
Settings.
2 Choose Printers.
3 Select the magicolor 6100 DeskLaser
printer driver.
4 From the File menu, choose Properties.
5 Make your selections, and then choose
OK to save your changes.
6 Close the Printers window.
How To:
1 From the application’s File menu choose
Print (or, in some cases, Print Setup or
Page Setup).
2 In the Print, Print Setup, or Page Setup
dialog box, select the magicolor 6100
DeskLaser printer driver.
3 Choose the Properties button.
4 Make your selections, and then choose
OK to save your changes.
5 Choose OK from the Print Setup window.