Filter
Top Products
Advanced Features and Troubleshooting Manual 87
Control Panel Messages
Control Panel Messages
When the printer’s control panel displays a message, find the message in the following
table listed in alphabetical order. If there is a problem, perform the corrective action for
resolving the problem. If the problem persists, check the Xerox troubleshooting knowledge
database on the web at: www.xerox.com/officeprinting/infoSMART or contact your
Customer Support Center. See Appendix D - Xerox Customer Support Centers on page 115.
Error Description and corrective action
0001
-ESS A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.
0001
-BASE RAM A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.
0001
-BASE ROM A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.
0001
-ASIC A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.
0001
-TIMER A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.
0001
-PWPM A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.
0001
-DMA A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.
0001
-COMM A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.
0001
-USB A fault condition has occurred.
■ Power OFF and Power ON the printer.
■ If this code appears again at Power ON, contact your Customer Support
Center.