Filter
Top Products
Advanced Features and Troubleshooting Manual 63
Networking
Setting up AppSocket
To enable or disable the AppSocket protocol, perform the following steps:
1. Press the Menu keys (labeled 1 or 5) until you see:
Menus
Ethernet Menu
2. Press the Item keys (labeled 2 or 6) until you see:
Ethernet Menu
AppSocket Enabl
3. Press the Value keys (labeled 3 or 7) until you see:
AppSocket Enabl =
On or Off
4. Press the Enter key (labeled 4). You should see:
Ethernet Menu
AppSocket Enabl
5. Press the On Line key (labeled 0). You should see:
Ready
Printing a Configuration Sheet
It is important to print a Configuration Sheet from the printer to determine the current
network settings of your DocuPrint N4525 printer. The default settings enable all ports,
which are suitable for most applications. Refer to page 37 for step-by-step instructions on
printing a Configuration Sheet.
Note
If you change any settings, print another Configuration Sheet to verify that your
changes were made.