Filter
Top Products
Advanced Features and Troubleshooting Manual 19
Control Panel Menus
Policy Timeout Specifies how many seconds the printer should wait before taking the action
defined by the setting of the Page Policy item.
Values: (in seconds)
300
180
120
60
30 (default)
0
Print Quantity Specifies number of copies of each page.
Values:
1 - 999 (default is 1)
Note: The number changes incrementally by 1 each time you press either the
Value key (labeled 3 or 7). To scroll quickly through the numbers, hold
down either key.
Duplex Enables/disables duplex printing for PostScript and PCL jobs. (This menu
item only appears if the printer has the Duplex Module installed.)
Values:
Off (default)
Long Edge
Short Edge
Note: For more information on duplex printing and choosing Long Edge or
Short Edge, see Printing two-sided (duplex) jobs in the User Guide.
Draft Mode Enables/disables Draft Mode, which reduces the amount of toner by up to
two-thirds (and prints a draft-quality output). Intended for occasional (not
continuous) use.
Values:
Off (default)
On
Edge-to-Edge Enables/disables edge-to-edge printing.
Values:
Off (default)
On
Note: Although the printer can address edge-to-edge, there is a 4 mm border
on all sides where print quality cannot be guaranteed.
XIE Sets the default Xerox Image Enhancement (XIE) mode:
■ Smoothes jagged edges.
■ Fills-in solid fills.
Values:
Off (default)
On
Note: XIE functions only when Resolution is set to 600x600 and
Draft Mode is set to Off.
Resolution Sets the default resolution for PCL and PostScript jobs. (PCL 5e is always set
to 600x600).
Values:
600x600 (default)
1200 Quality
System Menu Items (cont'd.)