Filter
Top Products
■
Place the printer in an area where there is adequate space for ventilation, operation and servicing. The
recommended minimal spacing is 92.5 cm (36.5 in.) in front of and above the printer, 20.3 cm (8 in.) behind
the printer, and 30.5 cm (12.0 in.) on each side of the printer. Do not block or cover the slots and openings
on the printer. Without adequate ventilation, the printer may overheat.
■
For optimum performance, use the printer at elevations below 2,500 meters (8,200 ft.). Use at elevations
above 2,500 meters (8,200 ft.) exceeds operability limits.
■
Do not place the printer near a heat source.
■
Do not place the printer in direct sunlight.
■
Do not place the printer in line with the cold air flow from an air conditioning system.
■
Place the printer on a level, solid surface with adequate strength for the weight of the machine. The base
printer weight without any packaging materials is 53 kg (117 lbs.).
■
The printer is heavy, and must be lifted by two people. The illustration below shows the proper technique
for lifting the printer.
■
Exercise care in moving or relocating the printer, it is back-heavy and could tip backward. Follow the
recommended procedure when moving the printer from one location to another. Refer to the
DocuPrint
N4525 Installation poster.
■
Do not place any liquids on the printer.
Warning
Be careful when working in areas inside the printer identified with a warning symbol. These areas
may be very hot and could cause personal injury.
■
Wait 10-15 seconds between switching the printer off and on.
■
Keep hands, hair, neckties, etc., away from the exit and feed rollers.
While printing, do not remove:
■
The media source tray that you have selected in the driver or front panel.
■
Do not switch off the printer power while printing.
■
Do not move the printer while printing.
4525-100
53 kg
117 lbs
4525-99