Filter
Top Products
Advanced Features and Troubleshooting Manual 21
Control Panel Menus
Config Legal/B4 Specifies which size will be recognized by the tray size switches.
Values:
Legal
B4-JIS
Notes: For these changes to take place, you must either power the machine
Off and then power it back On, or restart the printer from the Print or
Job Menus
.
The default is
Legal when Inches is set and B4-JIS when
Millimeters is set as the System Menu’s Defaults value.
Config Exec/B5 Specifies which size will be recognized by the tray size switches.
Values:
Exec
B5-JIS
Notes: For these changes to take place, you must either power the machine
Off and then power it back On, or restart the printer from the Print or
Job Menus.
The default is
Exec when Inches is set and B5-JIS when
Millimeters is set as the System Menu’s Defaults value.
Face Up Bin Enables the optional Face Up Bin.
Values:
Installed
Not Installed (default)
Note: For these changes to take place, you must either power the machine
Off and then power it back On, or restart the printer from the Print or
Job Menus.
Defaults Specifies the type of factory defaults to use when a printer reset is
performed.
Values:
Inches
Millimeters
Notes: For these changes to take place, you must either power the machine
Off and then power it back On, or restart the printer from the Print or
Job Menus.
When set to
Inches, the default Paper Size value is Letter; the default
MBF Size is set to
Letter; the default Custom Size is set to Letter; the
default Config Legal/B4 is set to
Legal; the default Config Exec/B5 is set to
Executive; and the default Envelope Size is set to Com10.
When set to
Millimeters, the default Paper Size value is set to A4; the
default MBF Size is set to
A4; the default Custom Size is set to A4; the
default Config Legal/B4 is set to
B4-JIS; the default Config Exec/B5 is set to
B5-JIS; and the default Envelope Size is set to DL.
The default Form Length value in the PCL Menu is adjusted to match the
Paper Size.
System Menu Items (cont'd.)