Filter
Top Products
Advanced Features and Troubleshooting Manual 59
Hard Disk Drive and Memory (DRAM and Flash ROM)
The following example creates a PCL proof job with the name “Sample” associated with
password 7777 requesting five collated sets in addition to the proof copy.
<ESC>%-12345X@PJL XPROOFJOB
@PJL XJOBPASSWORD = 7777
@PJL JOB NAME = "Sample"
@PJL ENTER LANGUAGE = PCL
@PJL SET QTY = 5
...PCL file...
<ESC>%-012345X@PJL EOJ
<ESC>%-012345X.
The printer continues processing all data after the @PJL SET QTY = 5 command as part of
the proof job named “Sample.” The proof job is stored on the hard disk under the name
“Sample” with a password of "7777" (as defined in the PJL XJOBPASSWORD command).
The @PJL EOJ command signifies the end of the proof job ends. The “EOJ” command
should be followed by a UEL.
Deleting secure or proof jobs
You use the Password Menu to print or delete secure or proof jobs.
1. On the control panel, press the Menu keys (labeled 1 or 5) to scroll to the Password
Menu.
2. Press the Item keys (labeled 2 or 6) to scroll to the password prompt.
3. Use the number keys to enter the 4-digit password for the job(s) you want to print
completely.
4. Press the Item keys (labeled 2 or 6) to select either All Jobs or a particular jobs with
this password.
5. Press the Value keys (labeled 3 or 7) to select either Print or Delete.
6. Press the Enter key (labeled 4).
7. Press the On Line key (labeled 0) to exit the menus.