Filter
Top Products
42 DocuPrint N4525 Network Laser Printer
Advanced Features
Note
Specifying a paper source (a specific tray) does not guarantee that paper will be
fed from that tray if the type and size can be satisfied from another source. The
exception to this is a manual feed request, which always uses the MBF unless
you override this selection.
Tray Sequence Examples
The following examples discuss what the printer does when you use various tray sequence
settings.
Specified Not specified Specified
(manual feed)
Manual feed request;
specified type; default size;
Specified Specified Not specified Specified type; specified size
Specified Specified Specified
(not manual feed)
Specified type; specified size
Specified Specified Specified
(manual feed)
Manual feed request;
specified type; specified size
Condition Actions taken
The tray sequence is 4-5-1.
All trays contain Letter paper.
Tray 1 is empty.
You request
Letter paper; the source is set to
Auto.
The printer searches for letter paper in the tray
sequence order (4-5-1). The printer feeds paper
from Tray 4 until it becomes empty, and then from
Tray 5. When Tray 5 becomes empty, the printer
prompts you to load paper (since Tray 1 is empty).
Note: Trays 2 and 3 also contain letter paper, but
these trays are not searched because they are not
part of the tray sequence and the printer found the
requested paper in at least one tray in the
sequence.
The tray sequence is 1-2-3.
You request Tray 2.
All trays meet the size/type requirement.
The printer feeds paper from Tray 2 because it
meets the size and type requested. When Tray 2
becomes empty, the printer feeds from Tray 1 and
then Tray 3.
The tray sequence is 1-2.
Trays 1 and 2 contain Letter paper, but both
trays are empty.
You request Letter paper from Tray 2.
The printer prompts you to load letter paper in
Tray 1 because it is configured for letter paper.
The tray sequence is MBF-1-2.
The MBF is set to Letter paper and contains
one sheet of paper.
All other trays contain Letter paper.
You request Letter paper from Tray 2.
The printer feeds the first page of the job from the
MBF and subsequent pages from Tray 2.
The tray sequence is any setting.
All trays contain Letter paper.
You request Legal paper from Tray 2.
The printer prompts you to load legal paper in
Tray 2.
Paper Type Paper Size Paper Source Size/Type Used