Filter
Top Products
Advanced Features and Troubleshooting Manual 35
Control Panel Menus
Reset Menu
Accesses printer reset functions. This menu only appears when the printer is powered on
while holding down the On Line and Enter keys (labeled 0 and 4).
Reset Menu Items
Menu Items Description
Factory Defaults Resets menus to factory defaults — with the exception of
Language in the
Reset Menu, Defaults in the System Menu, and network parameters
(in the Ethernet, Token Ring, and Novell menus).
Values:
Yes
No (default)
Network Defaults Resets parameters in the Ethernet, Token Ring, and Novell menus to factory
defaults.
Values:
Yes
No (default)
Demo Mode Places the printer in demo mode.
Values:
Yes
No (default)
In Demo Mode, you can print different factory-installed demo pages by using
the eight control panel keys to select the type of demo page and the number
of copies.
Once in Demo Mode, the printer re-enters Demo Mode automatically every
time the power is cycled.
Exit Demo Mode by powering on the printer while holding down the
On Line and Enter keys (labeled 0 and 4).
Delete All Jobs Deletes all secure jobs from the hard disk. (This menu item only appears if
the optional hard drive is installed.)
Values:
Yes
No (default)
Disk Initialize Initializes the hard disk. (This menu item only appears if the optional hard
drive is installed.)
Values:
Yes
No (default)
Note: This is ignored if the disk is locked (write protected) via a PJL or SNMP
command.
Disk Format Formats the hard disk drive. (This menu item only appears if the optional
hard drive is installed.)
Values:
Yes
No (default)
Normally, you only use this menu item if the disk was not already formatted.
If used on a formatted disk, it will write over any existing data on the disk.
Note: This is ignored if the disk is locked (write protected) via a PJL or SNMP
command.