Filter
Top Products
DOS Utilities • 105
◆ Auto-continue
When auto-continue is enabled, the printer automatically resumes
printing after auto-continuable errors.
◆ Horizontal offset
This setting adjusts your printing position left or right on your print
media. The valid values range from -127 to +127 with default set at
0.
◆ Vertical offset
This settings allows you to adjust the printing position up or down
on your print media. The valid values range from -127 to +127 with
default set at 0.
◆ Save settings, return to Main Menu
When this is selected, the current settings are written to XCP12.INI
and the printer settings will be changed. If you do not select this,
any changes you have made here will not take effect.