Filter
Top Products
Control Panel • 55
4-2 The LEDs
The table below describes the possible status of the printer and how the
LEDs respond to these status.
Online Error Paper Manual
Feed
Printer Status
Blink Blink Blink Blink Diagnostic Processing
Blink cycle Initializing
Double
blink
Double
blink
Double
blink
Double
blink
Non-volatile RAM reset to
factory defaults
On Ready
Blink In use
Double
blink
Waiting for data
Blink Manual feed
Blink No paper
Blink On Pre-printing paper size
error
On Cover open
On Blink Paper Jam
On Blink Page too
complex/Memory
overflow
On Blink Post printing paper size
error
On Blink Lower resolution used
On Blink Job aborted
Off Off Off Off Paused/Off-line
On On On Hardware malfunction
Blink Off Off Off Energy saving mode
The LED responses are defined as follows:
Response Explanation
Blink cycle Light will cycle through all LEDs 3 times
On Light is on
Off Light is off
Blink 0.5 second on / 0.5 second off, repeat
Double-blink 0.25 second on / 0.25 second off / 0.25
second on / 1 second off, repeat
For details on printer status, its cause and (or) solutions, refer to the
table on the next page.