Filter
Top Products
vi • Safety Notes
Electrical Safety
Always follow a code of safe habits starting with the following:
1. Use only the power cord supplied with your Xerox DocuPrint P12.
2. Do not use a ground adapter plug to connect the Xerox DocuPrint P12 to a power source
receptacle that lacks a ground connection terminal.
3. Plug the power cable directly into a properly grounded electrical outlet. Do not use an
extension cord. If you are not sure whether or not an outlet is properly grounded, consult an
electrician.
WARNING You might receive a severe electrical shock if you do not connect the
grounding conductors properly.
4. Do not place the Xerox DocuPrint P12 where people might step or trip on the power cable.
5. Do not place objects on the power cable.
6. Do not override or disable electrical or mechanical interlocks.
7. Do not obstruct ventilation openings. These openings are provided to prevent overheating of
the machine.
WARNING Do not push objects into slots and openings on the Xerox DocuPrint P12.
Contacting a voltage point or shorting out a part might result in electrical
shock or fire.
8. If any of the following conditions occur, turn off the Xerox DocuPrint P12 power immediately.
Disconnect the power cable from the electrical outlet. Contact an authorized Xerox Service
Representative to correct the problem:
• The Xerox DocuPrint P12 emits unusual odors, or makes unusual noises.
• The power cable is damaged or frayed.
• Liquid is spilled into the Xerox DocuPrint P12.
• Any part of the Xerox DocuPrint P12 is damaged.
• The Xerox DocuPrint P12 is exposed to water.
Disconnect Device
The power cord is the disconnect device for the Xerox DocuPrint P12. It is attached to the back of
the machine as a plug-in device. To remove all electrical power from the Xerox DocuPrint P12,
disconnect the power cord from the power receptacle.