Filter
Top Products
Printer Options • 131
11
While pressing the SIMM into the socket, rotate the SIMM
upward until the clips at both end of the socket snap into place
to hold it.
12
Verify that the SIMM is correctly and securely installed in the
socket with both dips in place.
13
Reinstall the side cover as follows:
➀ Slide the side cover back on the printer until it clicks into place.
➁ At the back of the printer, tighten the thumb screws that fasten
the side cover.
14
Close the top cover and push the paper tray back in.
15
Connect the power cord to the back of the printer.
16
Connect the other end of the power cord to a grounded wall
outlet.
17
Switch on the printer.