Filter
Top Products
86 • Chapter 5
Wait time-out
Valid values ranges from 5 to 300 seconds or off. The default is
200 seconds.
This setting determines the length of time the printer will wait for
data. While waiting, the printer will preserve any partially-received
job, and no new job will be accepted on the other input ports.
Partial jobs can be printed by pressing the printer’s control panel
button.
Manual Feed/Duplex time-out
Valid values ranges from 1 to 255 seconds or off. The default is
180 seconds.
This setting determines the length of time the printer will wait before
attempting to draw paper from the main tray during Manual Feed
status and manual duplex pause, or from the specified source
during a Pre-print paper size error, even if the paper size is wrong.
☞
☞☞
☞ 4-2 The LEDs