Routine Maintenance
Adjust Printhead Pressure and Toggle Position
120
P1056468-002 105SLPlus™ User Guide 7/3/13
5. Tighten the locking nuts.
6. Print additional labels at 2 in. (51 mm) per second by again running the PAUSE Self Test.
(Press and hold
PAUSE while turning on (I) the printer.)
7. Do both sides of the label print at the same level of gray?
If… Then…
Yes The toggles are positioned correctly. Increase the darkness setting to the
optimum level for the media being used.
No
a. Readjust the position of the toggle or toggles toward the side that printed
lighter.
b. Print additional labels at 2 in. (51 mm) per second by again running the
PAUSE Self Test. (Press and hold
PAUSE while turning on (I) the printer.)
c. Repeat this step until both sides of the label print at the same level of gray.
d. Increase the darkness setting to the optimum level for the media being used.