83
Printer Configuration and Adjustment
Changing Printer Settings
7/3/13 P1056468-002
Print Settings
Table 7 • Print Settings
Print
Darkness
Set the darkness to the lowest setting that provides good print quality. If you set the darkness
too high, the label image may print unclearly, bar codes may not scan correctly, the ribbon
may burn through, or the printhead may wear prematurely.
If desired, use the FEED Self Test on page 151 to determine the best darkness setting.
Accepted values:
0.0 – 30.0
Related ZPL command(s):
^MD, ~SD
SGD command used:
print.tone
Control panel menu item: DARKNESS on page 21
Printer web page:
View and Modify Printer Settings > General Setup >
Darkness
Print Speed Select the speed for printing a label (given in inches per second). Slower print speeds
typically yield better print quality.
Accepted values:
• 203 dpi: 2–12 ips
• 300 dpi: 2–9 ips
Related ZPL command(s):
^PR
SGD command used:
media.speed
Control panel menu item: PRINT SPEED on page 21
Printer web page:
View and Modify Printer Settings > General Setup >
Print Speed