Filter
Top Products
97
Printer Configuration and Adjustment
Changing Printer Settings
7/3/13 P1056468-002
IP Protocol Set the IP Resolution Method
This parameter tells if the user (permanent) or the server (dynamic) selects the
IP address. If a dynamic option is chosen, this parameter tells the method(s) by which
the wired or wireless print server receives the IP address from the server.
Accepted values:
• ALL
• GLEANING ONLY
• RARP
• BOOTP
• DHCP
• DHCP & BOOTP
• PERMANENT
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.protocol
external_wired.ip.protocol
Wireless: wlan.ip.protocol
Control panel menu item: IP PROTOCOL on page 33
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings > IP Protocol
IP Address View or Set the Printer’s IP Address
View and, if necessary, change the printer’s IP address.
Changes to this setting are saved only if IP PROTOCOL is set to PERMANENT. To
allow any saved changes to take effect, reset the print server (see Reset Network
on page 99).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.addr
external_wired.ip.addr
Wireless: ip.addr, wlan.ip.addr
Control panel menu item: IP ADDRESS on page 33
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings > IP Address
Table 9 • Network Settings (Continued)