Zebra Technologies 105SL Plus Printer User Manual


 
Printer Configuration and Adjustment
Changing Printer Settings
96
P1056468-002 7/3/13
Network Settings
Table 9 • Network Settings
Primary Network Select the Primary Network Device
This parameter determines which device should be considered primary in the active
device selection.
Accepted values:
WIRED
WIRELESS
Related ZPL command(s):
^NC
SGD command used: ip.primary_network
Control panel menu item: PRIMARY NETWORK on page 32
Printer web page: none
Load from
External Device
View if IP Settings Are Loaded from the Printer or Print Server
This parameter tells whether to use the printer’s or the print server’s LAN/WLAN
settings at power-up. The default is to use the printer’s settings.
Accepted values:
YES
NO
Related ZPL command(s):
^NP
SGD command used: none
Control panel menu item: LOAD FROM EXT? on page 33
Printer web page: none
Active Print
Server
View the Active Print Server
This menu item displays which print server is being used. This tells which device’s
settings such as IP protocol and IP address are being displayed under those menu items.
Accepted values:
WIRELESS indicates that the wireless print server
is active.
INTERNAL WIRED indicates that the internal
wired print server is active.
EXTERNAL WIRED indicates that an external
wired print server is active.
NONE indicates that one of the network options is
installed but is not active. When NONE is shown
for this menu item, the device-specific items such
as IP protocol and IP address will not display.
Related ZPL command(s): none
SGD command used: none
Control panel menu item: ACTIVE PRINTSRVR on page 33
Printer web page: none