Filter
Top Products
143
Troubleshooting
Error Messages
7/3/13 P1056468-002
There is not enough memory to
perform the function specified on
the second line of the error
message.
Free up some of the printer’s memory
by adjusting the label format or printer
parameters. One way to free up
memory is to adjust the print width to
the actual width of the label instead of
leaving the print width set to the
default. See Print Width on page 85.
Ensure that the device, such as a
FLASH memory card, is installed and
not write protected or full.
Ensure that the data is not directed to a
device that is not installed or is
unavailable.
Call a service technician.
Table 15 • Error Messages (Continued)
Display/
Printer Condition
Possible Cause Recommended Solution