Filter
Top Products
137
To change the Supervisor/User password
1 Use the up/down keys to highlight either set password parameters
then press Enter.
2 Type the original password then press Enter.
3 Type a new password then press Enter.
4 Retype the password to verify the first entry then press Enter
again.
To remove the User/Supervisor password
1 Use the up/down keys to highlight either set password parameters
then press Enter.
2 Enter the current password then press Enter.
3Press Enter twice without entering anything in the new and
confirm password fields.
After doing this, the system automatically sets the corresponding
password parameter to Clear.
AA G900 ug - EN.book Page 137 Wednesday, September 25, 2002 5:23 PM