Filter
Top Products
3 Hardware configuration
66
To install processors
1 Raise the locking bar on the socket.
2 Orient the processor so that the triangle on the corner of the
processor aligns with the triangle on the corner of the socket.
3 Aligning the pins of the processor with the socket, insert the
processor into the socket. The processor should drop into the
socket without requiring any force.
4 Lower the locking bar completely.
Figure 30 - Raising the locking bar
Figure 31 - Installing a processor
AA G900 ug - EN.book Page 66 Wednesday, September 25, 2002 5:23 PM