Filter
Top Products
Appendix A: System rack installation
156
3 Attach the three bushings on the left frame wall of the chassis
(Figure 65, E) in the pattern shown in Figure 65 using the same
procedure described in step 1.
Installing the handles and rails
To complete the installation the rack conversion kit contents, you must
also have the rack-mount rail kit.
WARNING! To avoid personal injury when handling the
server, use a hand-truck or other mechanical assist unit to
move the server from one location to another. Do not
attempt to lift or move the server by the handles on the
power supplies.
Refer to the installation guide that came with the rack-mount rail kit
for detailed instructions on installing the handles and rails, as well as
mounting the server in the rack.
Figure 65 - Installing the bushings
AA G900 ug - EN.book Page 156 Wednesday, September 25, 2002 5:23 PM