Filter
Top Products
Appendix B: System management
186
• One or more .fru files describing the system's field replaceable
units
• A .cfg file describing the system configuration
• An .sdr file describing the sensors in the system
Command line format
The basic command line format is:
FRUSDR [-?] [-h] [-d {fru, sdr, smb}] [-cfg filename.cfg] [-fru filename.fru]
The FRU/SDR load utility allows only one of the command line options
?, h, d, fru, or cfg at a time. You can use the p flag with any of the
other options. You can use either a slash (/) or a minus sign (-) to
specify command line options.
Displaying a given area
When the utility is run with the -d option, information about the
specified area is read from memory and displayed. If the given display
function fails because of an inability to parse the data present or a
hardware failure, the utility displays an error message and exits.
Option Description
-? or -h Display usage information.
-d {fru, sdr, smb} Display requested area only.
-cfg filename.cfg Updates the FRU and SDR configuration using
a CFG file.
-fru filename.fru Updates the FRU configuration using a FRU
file.
-p Pause between blocks of data.
AA G900 ug - EN.book Page 186 Wednesday, September 25, 2002 5:23 PM