Filter
Top Products
153
Note: Do not throw away the keys from the original tower bezel.
The keys and lock on each bezel are paired together and will not
work with a different bezel. The lockset and the keys both have a
stamped number on them, and these numbers must match for the
keys to work.
Removing the feet
1 Place the chassis on a workbench so it is lying on its bottom and
the feet (Figure 63, A) are on the right.
2 Remove the screw (Figure 63, B) that holds the front foot to the
chassis, slide the foot upward, then remove the foot.
Figure 62 - Removing the original tower bezel
AA G900 ug - EN.book Page 153 Wednesday, September 25, 2002 5:23 PM