Filter
Top Products
Chapter 2 29
Installation
Installing the Hardware
n ThinLAN Connections. For ThinLAN, connect the LAN cable to the
BNC connector on the back panel of the Gateway using a BNC “T”
connector. Make sure the ThinLAN segment is properly terminated.
If the Gateway is the end node on the LAN, a 50-ohm BNC
terminator must be attached to the “T” connector.
Connecting to a ThinLAN Using a BNC “T” Connector
Connecting to a ThinLAN Using a BNC “T” Connector and 50-Ohm Terminator