Filter
Top Products
30 Chapter 2
Installation
Installing the Hardware
Step 4: Connect GPIB Cable and Power Cords
n Connect the GPIB cable from the GPIB instrument(s) to the GPIB
connector on the back panel of the Gateway.
n Connect the DC power cord attached to the power module (AC/DC
Adapter) to the power input on the back panel of the Gateway, as
shown.
n Connect the standard AC power cord to AC IN on the power module
and to a power outlet (wall outlet), as shown.
NOTE
The power module and Gateway do not have power switches.
Connecting the standard AC power cord to the power source (wall outlet)
activates both units. The power module automatically adapts to the
correct AC voltage range for your power source.
Connecting the Power Module