Filter
Top Products
Chapter 4 67
Administration
Using the Telnet Utility
5 If you are using a Windows 95/98/Me/2000/NT client system, you
may also need to turn on
Local Echo in the Terminal Preferences
dialog box so that the Telnet utility will display your typed input.
To do this:
n From the menu at the top of the Telnet window, select
Terminal | Preferences. The
Terminal Preferences dialog
box is displayed.
n Click the checkbox next to Local Echo to turn it on. A
checkmark is displayed in the checkbox.
Local Echo is now
set on.
n Click OK to close the Terminal Preferences dialog box.
Welcome to the E2050 LAN/GPIB Gateway configuration utility.
Commands
?
exit, quit
reboot
status
Show additional commands
Exit WITHOUT saving configuration changes
Save configuration changes and restart
Show the LAN/GPIB Gateway connection status
Configuration Parameters
hostname:
hardware-addr:
ip:
default-gw:
subnet-mask:
syslog-svr:
bootp:
lan-timeout:
io-timeout:
allow:
E2050
0800091A0E02
156.140.4.249
0.0.0.0
0.0.0.0
156.140.4.244
OFF
7200
120
156.140.4.*
# Internet domain name
# Ethernet station address
# Internet Protocol address
# Default subnet gateway IP address
# Network subnet mask
# Syslog server IP address
# Obtain config via BOOTP/TFTP
# LAN connect timeout in seconds
# Server I/O timeout in seconds
# IP allow list
hpib-address:
hpib-name:
hpib-unit:
21
hpib1
7
# GPIB Address
# GPIB interface symbolic name
# GPIB logical unit number