Filter
Top Products
Chapter 3 49
Configuration
Configuration Methods
You should get a response from the ping command that is similar to
the following, where each line after the
PING line is an example of a
packet successfully reaching the Gateway from the client system.
If the
ping response is similar to the following, the Gateway has
been configured successfully.
Pinging E2050.agilent.com[128.10.0.3] with 32 bytes
of data:
Reply from 128.10.0.3:bytes=32 time=10ms TTL=255
Reply from 128.10.0.3:bytes=32 time=10ms TTL=255
Reply from 128.10.0.3:bytes=32 time=10ms TTL=255
.
.
.
However, if
ping is unable to reach the host, you will see a message
similar to the following. This indicates the client was unable to
contact the Gateway and there may be some problem with the
Gateway’s configuration or with the network itself.
If you have trouble
configuring the Gateway or want to verify that the configuration is correct,
see Chapter 5.
Pinging E2050.agilent.com[128.10.0.3] with 32 bytes
of data:
Request timed out.
Request timed out.
Request timed out.