Filter
Top Products
70 Chapter 4
Administration
Querying the Gateway
Querying the Gateway
This section gives guidelines to query the E2050 LAN/GPIB gateway,
including:
n Querying the Current Configuration
n Querying the Firmware Version
n Querying the Configuration Method
n Querying Gateway/Client Connections
Querying the Current Configuration
As soon as you access the Gateway’s Telnet utility, you see a screen of
information, including a listing of the Gateway’s current configuration
settings. However, you can view the current configuration settings at any
time while you are using the Telnet utility by typing config at the Telnet
prompt (>).
If you want to change any of the configuration values, see “Configuring the
Gateway.” If you want to exit the Telnet utility with or without saving any
configuration value changes, see “Exiting the Telnet Utility”.
Querying the Firmware Revision
You may need to determine the version of the Gateway’s firmware if you
contact Agilent for support information or if you need to update the firmware
to a new version in the future.
To determine the current version of the Gateway’s firmware, type version
at the Telnet prompt (>). You will see the version of the software and
Bootrom for the Gateway, which will be similar to the following:
Software revision A.01.05
Bootrom revision A.01.03