Filter
Top Products
Chapter 4 69
Administration
Using the Telnet Utility
Command Description
allow: IP_address(es) Set the IP allow list configuration value for the Gateway.
bootp: ON/OFF Turn ON or OFF the use of BOOTP or BOOTP with TFTP
configuration of the Gateway.
bye Quit the Telnet utility without saving configuration changes.
config Display the current configuration settings for the Gateway.
default-gw: IP_address Set the default subnet gateway address configuration value for
the Gateway.
exit Exit the Telnet utility without saving configuration changes.
factory-reset Reset the Gateway to its default configuration values and reboot
the Gateway.
hardware-addr Display the Gateway’s LAN hardware address.
help Print help information on the main Telnet commands.
hostname: string Set the Internet domain name configuration value for the Gateway.
hpib-address: 0-30 Set the GPIB address configuration value for the Gateway.
hpib-name: string Set the GPIB interface symbolic name configuration value for the
Gateway.
hpib-unit: 1-255 Set GPIB logical unit number configuration value for the Gateway.
io-timeout: seconds Set the server I/O timeout configuration value for the Gateway.
ip: IP_address Set the IP address configuration value for the Gateway.
lan-timeout: seconds Set the LAN connect timeout configuration value for the Gateway.
quit Quit the Telnet utility without saving configuration changes.
reboot Save configuration changes and restart the Gateway.
status Display the status of the Gateway and client connections.
subnet-mask: mask Set the network subnet mask configuration value for the Gateway.
syslog-clear Clear the syslog file.
syslog-display Display the syslog file’s contents.
syslog-svr: IP_address Set the syslog server address configuration value for the Gateway.
version Display the version of the Gateway’s firmware.